Operation Via Internal Led; Description Of Display And Buttons - Siemens LME7 Series Basic Documentation

Button
A
nfo
-
+
-
and
Building Technologies
HVAC Products
21

Operation via internal LED

21.1

Description of display and buttons

Figure 66: Description of the display and buttons
Function
Button A
- Display preset output
- In lockout position: Power value to the time of fault
Info and Enter button
- Reset in the event of fault, changeover visual diagnostic of the cause of fault
(refer to chapter Diagnostics of the cause of fault )
- button
- Display flame signal current 2 or phases display
- In lockout position: MMI phase to the time of fault
+ button
- Display flame signal current 1 or phases display
- In lockout position: MMI phase to the time of fault
3 multi color signal lamp
- Refer to «Blink code table»
+ and - button: Escape function
+
-
(press and
- No adoption of value
- One menu level up
21.2 Normal display
Normal display is the standard display in normal operation.
21.2.1 Display in standby mode
Basic Documentation LME7...
21 Operation via internal LED
-
+
A
+
simultaneously)
Unit is in standby mode.
nfo
102/164
CC1P7105en
13.10.2009