Display Of Operating Position - Siemens LME7 Series Basic Documentation
Burner control
Hide thumbs
Also See for LME7 Series:
- Technical instructions (140 pages) ,
- Basic documentation (245 pages) ,
- Manual (106 pages)
Table of Contents
Advertisement
P
Building Technologies
HVAC Products
19.4.1.3.
Display of operating position
V
h min s
%
Basic Documentation LME7...
19 Operation via the AZL2...
Display oP: P1 stands for «Stage 1».
The display following oP is unit-specific.
The display oP: P2 shows «stage 2».
The display after oP is unit specific.
The display oP: shows «modulating operation».
The display after oP: is unit specific.
The display shows the relative value from actual position
of actuator (51).
Position of actuator 0° = 0 Ω value of potentiometer = 0 %
display
Position of actuator high-fire >0° = >0 Ω <1000 Ω value of
potentiometer = 100 % display
75/164
CC1P7105en
13.10.2009
Advertisement
Table of Contents
