Normal Display; Display In Standby Mode; Display During Startup / Shutdown - Siemens LME7 Series Basic Documentation

Caution!
All modifications to parameters and settings are only be set and saved in the internal
unit memory of LME7... basic unit.
To save the modified settings to the program module PME7..., the backup must be trig-
gered manually.
→ Chapter Operating via AZL2... / backup
→ Chapter Operating via internal LED / backup
Caution!
On first startup or after exchange of the program module, the sequence of functions and
parameter settings must be checked upon completion of the restore process.
→ Refer to chapter Operation via AZL2... / first startup, restore
→ Refer to chapter Operation via internal LED / first startup, restore
Caution!
If any parameters are changed, a backup must be made!
P
Building Technologies
HVAC Products
19.4 Operation
19.4.1

Normal display

Normal display is the standard display in normal operation, representing the highest
menu level. From the normal display, you can change to the info, service or parameter
level.
19.4.1.1.

Display in standby mode

V h min s %
19.4.1.2.

Display during startup / shutdown

Display of program phases
Basic Documentation LME7...
19 Operation via the AZL2...
Unit is in standby mode.
The unit is in Phase 30. The controller calls for heat. The
bar below the and
program phases and controlled components are displayed
in accordance with the program sequence.
symbol appears. The individual
73/164
CC1P7105en
13.10.2009