Display Of Service Values; Error History; Mains Voltage/Intensity Of Flame; End Of Service Level - Siemens LME7 Series Basic Documentation

Note
Can be deleted for service (refer to chapter «Parameter list»)!
To the next parameter
End of service level – End –
To the start of the service
level
ESC
Building Technologies
HVAC Products
19.7.2

Display of service values

19.7.2.1.

Error history

Refer to section «Parameter with index, with or without direct display / Example of pa-
rameter 701 Error history».
19.7.2.2. Mains voltage
P
V
h min s
19.7.2.3. Intensity of flame
P
V h min s
19.7.2.4.

End of service level

P
V h min s
P
V h min s
P
V h min s
Basic Documentation LME7...
19 Operation via the AZL2...
Parameter 951: appears flashing.
Mains voltage is displayed on the right.
%
Example: 951: 120
The display shows parameter 954: flashing.
On the right, the intensity of the flame is displayed
in 0...100 %.
%
Example: 954:
When this display appears, you have reached the
end of the service level.
The display shows – End – flashing.
%
ESC
Press
The display shows OPErAtE.
%
When this display appears, you are back on the
normal display and you can change to the next
level mode.
%
Back to the previous
parameter
0
Back to the previous
parameter
To the end of the service
level
to return to standby mode.
CC1P7105en
84/164
13.10.2009