Error During Restore Process; Reset - Siemens LME7 Series Basic Documentation

Alternately with
or with
or with
Note
During the restore process, all settings and parameters are written from the program module to
the internal memory device of the basic unit. In the process, it is possible that previous program
sequences, parameters and settings in the internal memory device of the basic unit will be
overwritten!
nfo
>1 s
Note
For meaning of the error and diagnostic codes, refer to the error code list.
Building Technologies
HVAC Products

21.7.1 Error during restore process

21.7.2

Reset

Basic Documentation LME7...
21 Operation via internal LED
rSt and Er1 , Er2 or Er3 appears alternately in the display.
Meaning a possible cause, refer to chapter Error code list
with operation via internal LED .
When pressing (1...3 seconds)
played.
When the button is released, the basic unit will be unlocked
nfo
button, OFF will be dis-
115/164
CC1P7105en
13.10.2009