Operation Via Internal Led; Description Of Display And Buttons - Siemens LME7 Series Manual

Button
A
nfo
-
+
-
and
Building Technologies
15

Operation via internal LED

15.1

Description of display and buttons

Figure 22: Description of display and buttons
Function
Button A
- Display preset output
- In lockout position: Power value to the time of fault
Info and Enter button
- Reset in the event of fault, changeover visual diagnostic of the cause of fault
(see chapter Diagnostics of cause of fault )
- button
- Display flame signal current 2 or phases display
- In lockout position: MMI phase to the time of fault
+ button
- Display flame signal current 1 or phases display
- In lockout position: MMI phase to the time of fault
3 multicolor signal lamp
- See chapter Blink code table
+ and - button: Escape function
-
+
(press and
- No adoption of value
- One menu level up
- Keep depressed for >1 second for backup / restore function
Basic Documentation LME7...
15 Operation via internal LED
-
+
A
+
simultaneously)
nfo
87/106
CC1P7105en
17.04.2018