Configuration Procedures - Siemens DMS8000 MP4.30 Connectivity Manual

2.9.2

Configuration procedures

34
Building Technologies
Fire Safety & Security Products
The following are the configuration procedures for the Philips/Burle switcher unit:
Adding the folder for the Philips/Burle subsystems
1. Open the Composer project.
2. Create a folder for the CCTV components.
A new node appears in the Composer tree
Adding the Philips/Burle switcher node
1. Select the new folder.
2. In the left-hand bar, select the Video folder icon
3. In the menu that appears, select the Burle icon
 see Fig 4 at p.8.
You will have to select the exact model in the list (see Fig 27 below).
A new node appears in the Composer tree
Note: By default, the node will be named LTC8x00 #nn, reflecting the switcher
model name. You can customise the Description text by clicking the text, typing
a new name, and pressing Enter.
Fig 27 Selecting the Burle icon to add a CCTV switcher node
Importing the LMSmodular configuration
1. Select the Philips/Burle switcher node.
2. Select ToolsImport in the Composer menu to start the import.
After a confirmation request, the software presents a browsing window to
search for the files to import.
3. Using standard Windows controls, do the following:
– Look for LMS files, selecting the extension DBF in the browsing window.
– Locate the DB_SUB.DBF file.
– Select the file and click Open.
– When prompted, select the language of the DBF file.
– If more than one Philips/Burle unit is present in the metafile, the software
presents the complete list. Select the one you want to import and click OK.
048_DMS_DMS8000_Connectivity_Video_MP4.30_A6V10062457_a_en.doc
Configuring CCTV network
to add a switcher node.
06.2010