Contact - Siemens SIMATIC ET 200PA SMART Operating Instructions Manual

Special conditions:
Note
Special conditions
1. The device may only be used in areas with a pollution degree of not more than 2 according
to EN 60664‑1.
2. The modules must be installed in a suitable enclosure which provides a degree of protection
of at least IP54 in accordance with EN 60079‑7, taking into account the ambient conditions
of use.
3. Measures must be taken to protect against exceeding the rated operating voltage by
transient interference voltages of more than 119 V.
10.10

Contact

Range
Repair Service Fa‐
cility
Manufacturer
ET 200PA SMART
Operating Instructions, 06/2019, A5E34192013-AB
Contact
Name: Mr. Yu Ming Yang
E-mail: mingyang.yu@siemens.com
Org.: DI FA MF SEWC QM QR
Tel.: +86 (28) 6238 7267
Full address: Siemens Electronic Works Chengdu No. 99 Tianyuan Road, West
Park Chengdu Hi-Tech Zone, 611730 Chengdu, Sichuan province, China
Company : Siemens AG
Represented by : Mr. Wen, Da Jun
E-mail: dajun.wen@siemens.com
Org .: DI FA MF SEWC PU ENG1
Tel: +86 (28) 62387276
Full address : Siemens Electronic Works Chengdu No. 99 Tianyuan Road, West
Park Chengdu Hi-Tech Zone, 611730 Chengdu, Sichuan province, China
ET 200PA SMART I/O modules
10.10 Contact
219