Technical Specifications - Teledyne 4700 Serivce Manual

4700 Refrigerated Sampler Service Guide
Section 1 Introduction and General Guidelines
1.2 Technical
Specifications
Size (HWD):
Weight (empty):
Bottle Configurations:
Refrigerator Body:
Power Requirements:
Installation Category:
Pollution Degree:
a
Maximum Altitude :
Humidity:
Operational Temperature:
Pump
Intake Suction Tubing Length:
Material:
Suction Line Inside Diameter:
Pump Tubing Life:
Maximum Suction Lift:
Typical Repeatability:
Typical Delivered Volume Accuracy
(Ability to repeat the delivered volume
for a set of samples collected under
the same conditions.):
Typical Line Velocity at Head Height:
1-2
Table 1-1 contains technical specifications for the 4700 sampler.
Table 1-1 4700 Technical Specifications
130  72  84 cm
72 kg
12 different configurations available:
• 24 bottles, 1-liter PP or 350 ml glass;
• 4 bottles, 10-liter PE or glass;
• 2 bottles, 10-liter PE or glass;
• 1 bottle, 20-liter PE or glass;
• 1 bottle, 10-liter PE or glass;
• 24 ProPaks, 1-liter wedge-shaped;
• 1 ProPak, 10-liter round
Linear low-density polyethylene (LLDPE)
100 VAC ±10%, 50 Hz Sampler
Running current 1.4 amperes
Stalled current 21.3 amperes
115 VAC ±10%, 60 Hz Sampler
Running current 1.4 amperes
Stalled compressor current 21.3 amperes
230 VAC ±10%, 50 Hz Sampler
Running current 0.82 amperes
Stalled current 17 amperes
II
3
2,000 meters
0 to 100%
–29 to 49 °C
1 to 30 m
Vinyl or FEP-lined polyethylene
9 mm
Typically 1,000,000 pump counts.
8.5 m
±5ml or ±5% of the average volume in a set, whichever is greater, at lifts up to
25 feet.
±10ml or ±10% of programmed value, whichever is greater.
0.9 m: 0.91 m/s
3.1 m: 0.87 m/s
4.6 m: 0.83 m/s
7.6 m: 0.67 m/s
51  28  33 in
159 lb
–20 to 120 °F
3 to 99 feet
3
/
inch
8
28 feet
3 ft: 3.0 ft/s
10 ft: 2.9 ft/s
15 ft: 2.7 ft/s
25 ft: 2.2 ft/s