Single Image Switching; Pip Setting - RGBlink VENUS X1 Quick Start Manual

Single Image Switching

Default DVI for the current input source, if need switch other signal, for example, VGA, push the VGA button.
DVI button light will be blinking after pushing the VGA button, representing the singal is about to switched.
Users can check whether the output resolutions of VGA signal source is correct in the LCD menu, and then
switch to the main output through the TAKE button.
Same with above, switch the signals among CVBS, HDMI and input module option signal.

PIP Setting

Enable the PIP function
VENUS X1 supports seamless switching for single image and double images.
Push the [PIP/DSK] button, the LED light is on, and enter to the PIP menu items. OLED module show as follows:
Layout :
Select any one from PIP L+T, PIP R+T, PIP L+B, PIP R+B, PIP CENTER, PBP L+R and PBP T+B, take 3 layouts for
example, shown as follows:
PIP L+T
Select:
Select image A or image B. For example, select image B, the settings will be available for image B.
Swap Window:
Address：S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen, Fujian Province, P.R.C
->PIP
LAYOUT
SELECT
SWAP WINDOW
->ALPHA
ON
PIP L+T
IMAGE A
OFF
PBP L+R
7
Tel: 00865925771197
Email: sales@rgblink.com
0
PBP T+B
Fax: 00865925788216
http://www.rgblink.cn