Single Picture Switching; Picture In Picture Settings - RGBlink VSP268S Quick Start Manual

Single Picture Switching

When powered on, the system default input is HDMI. If other input source is wanted, for example VGA, just
push VGA button. VGA signal will be switched to the output in hard transition, where there will be black screen
or frozen picture. If seamless transition is required, activate seamless transition first. Push [TAKE] button for at
least 3 seconds to activate seamless transition function. Push VGA button to select VGA signal, then push [TAKE]
button, VGA signal will be transited to the screen in seamless cut or other transition effect. [TAKE] button is
defaulted with 1 second fade transition effect. If you want to change the duration of the transition effect, push
[MENU] button, select <Transition> and change the time of duration.
When use [TAKE] button to switch signals, on the LCD display users will be able to see the format and
resolution of the signal to be switched before switching. This will guarantee a safe and accurate operation.

Picture in Picture Settings

Activate PIP:
Push [PIP] button, button light on, PIP activated. Otherwise, PIP settings not available. On the LCD display it
will show the menu for setting PIP.
PIP layout setting:
Select one layout from the 7 layouts built in, push the knob to confirm. 3 examples of PIP layouts as below:
L+T
Swap image settings:
8
Address：S601-607, S504 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen, Fujian Province, P.R.C
L+R (PBP)
Tel: 00865925771197
Email: sales@rgblink.com
T+B
Fax: 00865925788216
http://www.rgblink.cn