Use Your Product; Single Image Switching; Pip Setting - RGBlink GX4 Quick Start Manual

USE YOUR PRODUCT

Single Image Switching

Default HDMI for the current input source, if need switch other signal, for example, DVI, push the DVI button.
DVI button light will be blinking after pushing the DVI button, indicating the singal is about to switched. Users
can check whether the output resolutions of DVI signal source is correct in the LCD menu, and then switch to
the main output through the TAKE button.
Same with above, switch the signals among SDI, VGA, CVBS and input module option signal.

PIP Setting

Enable the PIP function
GX4 supports seamless switching for single image and double images.
Push the [PIP/DSK] button, the LED light is on, and enter to the PIP menu items. OLED module show as follows:
Layout :
Select any one from PIP L+T, PIP R+T, PIP L+B, PIP R+B, PIP CENTER, PBP L+R and PBP T+B, take 3 layouts for
example, shown as follows:
PIP L+T
© Xiamen RGBlink Science & Technology Co., Ltd.
Ph: +86 592 5771197 |
->PIP
LAYOUT
SELECT
SWAP WINDOW
->ALPHA
support@rgblink.com
ON
PIP L+T
IMAGE A
OFF
PBP L+R
| www.rgblink.com
0
PBP T+B
8 / 20