Table of Contents
Advertisement
Single Image Switching
VSP 5360 can realize seamless effects switch between two channels, select the signal in PRE area, then push
[CUT] or [TAKE] button, the signal will be switched to LED display.
For example, switch VGA1 to LED display, first push the [VGA1] button in PRE area, then push [CUT] or [TAKE]
button, and the LED display will show VGA1 signal.
Default the switch time is 1 seconds for [TAKE] button, if need to adjust the fade in fade out time, push [MENU]
button and enter to the menu items, turn the knob, select <SYSTEM>, push the knob to confirm. Turn the
rotary knob, select <TRANSITION>, and set the fade time, push the [TAKE] button again, the signal will be
switched to the LED display with the adjusted time.
User can also switch the signal by pushing the signal button in PRO area, but the signal in monitor will not
change.
8
Address：S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen, Fujian Province, P.R.C
Tel: 00865925771197
Fax: 00865925771202
Email: sales@rgblink.com
http://www.rgblink.cn
Advertisement
Table of Contents
