Table of Contents
Advertisement
4. Adjust the H size, V size, H pos V pos, and mask top, bottom, left and right of the image by turning the rotary
knob or number buttons.
5. If image quality distorts by improper operation, it can be recover by reset.
Dimmer and Effects Setting
1. Push the [DIMMER] button, and enter to the menu items, which include dimmer and effects.
2. Dimmer setting: The adjustment range is 0~100.
3. Effects setting: The setting for effects include brightness, contrast, chroma, hue, color temperature, color
correction, gamma, brightness, H sharpness, V sharpness, noise reduction, Invert, Flip V, Flip H and Flip 90
Degree.
Split Setting
In split mode, user can set split parameters of single or multiple devices quickly. The split operations are as
follows:
Project: There is one LED display, the size is 3864x1152, divide into right and left halves, the left width is 1824
and the right width is 2040, we will cascade the two LED displays with one VSP 628PRO, and display a complete
picture in the whole screen.
(1) Connect the interface
Address：S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen, Fujian Province, P.R.C
Note
In PIP mode, user need to select the image that to
set in <Layer Select> option before setting.
Note
User can also select <Effects> in <Output> option by
pushing the [MENU] button for setting.
Note
In Dual 2K mode, User need to select the channel in
<Channel Select> before setting.
For example, choose the signal of CHB:
1. Push the [MENU] button to enter to menu items.
2. Select <Output>, push the rotary knob to confirm.
3. Turn the rotary knob, and select <Channel select>.
4. Turn the rotary knob and select CHB.
Select the signal, and CHB will switch to the
5.
selected signal.
Note
In Switcher mode, all the settings above are for
preview.
8
Tel: 00865925771197
Email: sales@rgblink.com
Fax: 00865925788216
http://www.rgblink.cn
Advertisement
Table of Contents
