Switching Mode - RGBlink M2 Quick Start Manual

Switching Mode

1. T-BAR switch: Switch the PST image to program with wipe and fade by T-bar.
2. CUT switch: Seamless switch the PST image to program by pushing [CUT] button.
3. TAKE switch: Switch the PST image to program with wipe and fade by pushing [TAKE] button.
4. TRANSITION DURATION: Transition duration setting, the adjustment range is between 0~9.9S.
21
© Xiamen RGBlink Science & Technology Co., Ltd.
21 / 28
Ph: +86 592 5771197 | support@rgblink.com | www.rgblink.com