Parameter assignment
9.2 Parameter assignment over device with display
9.2.17
Upper scaling point [19]
Sets the upper range value for the scaling.
Depending on the application of the device, you set the upper scaling point as follows:
Level
Setting range:
Factory setting:
Volume
Setting range:
Factory setting:
Volume flow
Setting range:
Factory setting:
Mass flow
Setting range:
Factory setting:
Custom units
Setting range:
Factory setting:
9.2.17.1
Set upper scaling point
1. Navigate to the parameter view.
Navigating in the views (Page 76)
2. Select the "Upper scaling point" parameter [19].
3. Use the
4. Set the upper scaling point.
9.2.18
Low flow cut-off [20]
Sets the flow value for the low flow cut-off. The flow value is suppressed up to certain
percentage of the output value.
132
Freely selectable numeric value
100 m
Freely selectable numeric value
1000 m
3
Freely selectable numeric value
1000 m
/s
3
Freely selectable numeric value
1000 kg/s
Freely selectable numeric value
USER DEFINED (custom), or as specified in order
button to confirm.
SITRANS P320/P420 with 4 to 20 mA/HART
Operating Instructions, 11/2019, A5E44852162-AC