Parameter assignment
9.2 Parameter assignment over device with display
Requirement
The "User PIN (Page 139)" parameter is enabled.
Procedure
1. Navigate to the parameter view.
Navigating in the views (Page 76)
2. Select the parameter "Change user PIN".
3. Press the
4. Enter the old user PIN.
5. Enter the new user PIN with a value between 1 and 65535.
Changing parameter values (Page 81)
6. Use the
7. Repeat the new user PIN and use the
Result
● If both user PINs match, the "COMPL" message appears.
The user PIN has been successfully changed.
● If the two user PINs do not match, the "FAILD" message appears.
Then repeat the described procedure.
9.2.23
Recovery ID [25]
Shows the recovery ID.
136
button.
button to confirm.
button to confirm.
SITRANS P320/P420 with 4 to 20 mA/HART
Operating Instructions, 11/2019, A5E44852162-AC