Mass Flow Units [16] - Siemens SITRANS P Operating Instructions Manual

This parameter is only visible when you have selected a volume flow characteristic curve using
the "Application" parameter.
Certain units are displayed differently on the display and over remote operation. (Page 107)
Setting range:
Factory setting:
9.2.14.4

Mass flow units [16]

Selects the unit for the mass flow measurement.
This parameter is only visible when you have selected a mass flow characteristic curve using
the "Application" parameter.
SITRANS P320/P420 with 4 to 20 mA/HART
Operating Instructions, 11/2019, A5E44852162-AC
9.2 Parameter assignment over device with display
Display (header line)
m3/sec
m3/min
m3/h
m3/d
l/Sec
l/min
l/h
Ml/d
FT3/Sec
Ft3/min
Ft3/h
Ft3/d
SCF/min
SCF/h
Nl/h
Nm3/h
Gal[UK]/Sec
Gal[UK]/min
Gal [UK]/h
Gal[UK]/d
Gal/Sec
Gal/min
Gal/h
Gal/d
Mgal/d
bbl/d
bbl/h
bbl/min
bbl/Sec
m³/s
Parameter assignment
Display (enumeration)
m3/S
m3/m
m3/h
m3/d
l/S
l/m
l/h
Ml/d
Ft3/S
Ft3/m
Ft3/h
Ft3/d
SCF/m
SCF/h
Nl/h
Nm3/h
IGa/S
IGa/m
IGal/h
IGa/d
Ga/S
Ga/m
Ga/h
Ga/d
MGI/d
bbl/d
bbl/h
bbl/m
bbl/S
Remote operation
m³/s
m³/min
m³/h
m³/d
l/s
l/min
l/h
Ml/d
ft³/s
ft³/min
ft³/h
ft³/d
SCF/min
SCF/h
Nl/h
Nm³/h
gal (UK)/s
gal (UK)/min
gal (UK)/h
gal (UK)/d
gal/s
gal/min
gal/h
gal/d
Mgal/d
bbl/d
bbl/h
bbl/min
bbl/s
129