Introduction; Purpose Of This Documentation; Scope Of Validity Of This Document; Document History - Siemens SITRANS P Operating Instructions Manual

Introduction

2.1

Purpose of this documentation

These instructions contain all information required to commission and use the device. Read the
instructions carefully prior to installation and commissioning. In order to use the device
correctly, first review its principle of operation.
The instructions are aimed at persons mechanically installing the device, connecting it
electronically, configuring the parameters and commissioning it, as well as service and
maintenance engineers.
2.2

Scope of validity of this document

Variant
Gauge pressure
Gauge pressure from the differential
pressure series
Absolute pressure from the gauge pres‐
sure series
Absolute pressure from the differential
pressure series
Differential pressure and flow rate,
PN 160 (MAWP 2320 psi)
Differential pressure and flow rate, PN
420 (MAWP 6092 psi)
Level
2.3

Document history

The overview below summarizes the most important changes in the documentation when
compared to the previous edition.
Edition
11/2019
09/2018
SITRANS P320/P420 with 4 to 20 mA/HART
Operating Instructions, 11/2019, A5E44852162-AC
SITRANS P320 mA/HART
7MF0300
7MF0310
7MF0320
7MF0330
7MF0340
7MF0350
7MF0360
Note
● Changes for FW1.01.00 HART device revision 7
● Section Technical data (Page 199) updated.
● Section Replacing spare parts (Page 185) added.
● Basic safety instructions in the sections Use in hazardous areas (Page 21),
Installing/mounting (Page 43), Connecting (Page 65) updated.
● Section Connecting the device (Page 68) updated.
● Section Parameter assignment over remote operation (Page 145) updated.
2
SITRANS P420 mA/HART
7MF0400
7MF0410
7MF0420
7MF0430
7MF0440
7MF0450
7MF0460
15