Parameter assignment
9.2 Parameter assignment over device with display
4. Select YES with the
5. Use the
The message "USER PIN OFF" appears for 2 seconds.
Result
The User PIN is disabled.
9.2.26
Active device mode [28]
Shows the mode in which the device is operated.
The parameter is only visible for devices with Functional Safety.
Setting range:
Factory setting:
You can find additional information on the device modes under Device mode (Page 163).
9.2.27
Functional Safety [29]
Enables Functional Safety.
The parameter is only visible for devices with Functional Safety.
You can find additional information about functional safety under Functional Safety (Page 159).
140
or
button.
button to confirm.
STD
FUNCT
SAFE
ERROR
O/S
STD
Functional Safety is disabled
Validation of the safety-related parameters and/or the fail-
safe behavior is performed
Functional Safety is enabled
Safety critical device error
Out of service mode, non-safe mode
SITRANS P320/P420 with 4 to 20 mA/HART
Operating Instructions, 11/2019, A5E44852162-AC