Eip-2202 And Eip-2402: 2-Port (Serial Terminals) Power Supply - Comtrol DeviceMaster EIP Series Hardware Installation And Configuration Manual

EIP-2202 and EIP-2402: 2-Port (Serial Terminals) Power Supply

This table provides the specifications to purchase a power supply for a DeviceMaster 2-port (EIP-2202 and
EIP-2402) with serial terminals DIN rail.
This table provides specifications if you intend on using your own power supply.
Output voltage†
Current†
Power
† Any power supply that meets current consumption, voltage,
DeviceMaster EIP | UP Hardware Installation and Configuration Guide: 2000633 Rev. C
Signal
Chassis
Ground†
Ground†
† Wire gauge: AWG 12-22
Signal Ground is used to connect RS-232 devices
later in the installation.
Comtrol device 2-Port DIN Rail (Serial Terminals)
(EIP-2202 and EIP-2402)
External Power Supply
power, and connector pin outs requirements can be used.
External Power Supply Specifications
6-30VDC
Return†
Positive†
6-30VDC
100 mA (Min) @ 24VDC
2.5 W
External Power Supply Specifications - 75