Accessing Redboot Commands In Telnet/Ssh Sessions (Portvision Dx) - Comtrol DeviceMaster MOD Series Hardware Installation And Configuration Manual

Managing the DeviceMaster

Accessing RedBoot Commands in Telnet/SSH Sessions (PortVision DX)

68 - Managing the DeviceMaster
You can open a Telnet or SSH session using PortVision DX to access RedBoot
commands.
Use the following procedure to access a telnet or SSH session with PortVision DX.
1. In PortVision DX, PortVision DX, right-click the DeviceMaster in the Device
List pane for which you want to open a telnet session, and click Telnet/SSH
Session.
2. Select Telnet or SSH, leave the Selected Port number, and click Ok.
DeviceMaster MOD | UP Hardware Installation and Configuration Guide: 2000630 Rev. B