TP-Link T2600G Series User Manual page 788

Configuring 802.1x
Switch#configure
Switch(config)#radius-server host 192.168.0.100 auth-port 1812 acct-port 1813 key
123456
Switch(config)#aaa group radius radius1
Switch(aaa-group)#server 192.168.0.100
Switch(aaa-group)#exit
Switch(config)#aaa authentication dot1x default radius1
Switch(config)#aaa accounting dot1x default radius1
Switch(config)#show radius-server
Server Ip
192.168.0.100
Switch(config)#show aaa group radius1
192.168.0.100
Switch(config)#show aaa authentication dot1x
Methodlist
default
Switch(config)#show aaa accounting dot1x
Methodlist
default
Switch(config)#end
Switch#copy running-config startup-config
2.2.2 Configuring 802.1x Globally
Follow these steps to configure 802.1x globally:
Step 1
Step 2
Auth Port Acct Port Timeout Retransmit NAS Identifier
1812 1813
pri1 pri2
radius1 --
pri1 pri2
radius1 --
configure
Enter global configuration mode.
dot1x system-auth-control
Enable 802.1x authentication globally.
5
pri3 pri4
-- --
pri3 pri4
-- --
802.1x Configuration
2 000AEB132397 123456
Shared key
User Guide 759