TP-Link T2600G Series User Manual page 1090

Step 2 rmon statistics index interface { fastEthernet port | gigabitEthernet port | ten-
gigabitEthernet port } [ owner owner-name ] [ status { underCreation | valid }]
Configure RMON Statistic entries.
index: Specify the index of the Statistics entry, which ranges from 1 to 65535. To configure
multiple indexes, enter a list of indexes separated by commas, or use a hyphen to indicates
a range of indexes. For example, 1-3, 5 indicates 1, 2, 3, 5.
port: Specify the port to be bound to the entry.
owner-name:
is monitor.
underCreation | valid:
created but invalid, while Valid indicates the entry is created and valid. By default, it is valid.
The switch start to collect Ethernet statistics for a Statistics entry since the entry status is
configured as valid.
Step 3 show rmon statistics [ index ]
Displays the statistics entries and their configurations.
index:
Enter the index of statistics entry that you want to view. Valid values are from 1 to
65535. The command without any parameters displays all existing statistics entries.
Step 4 end
Return to Privileged EXEC Mode.
Step 5 copy running-config startup-config
Save the settings in the configuration file.
The following example shows how to create Statistics entries 1 and 2 on the switch to
monitor port 1/0/1 and 1/0/2, respectively. The owner of the entries are both monitor and
the status are both valid:
Switch#configure
Switch(config)#rmon statistics 1 interface gigabitEthernet 1/0/1 owner monitor status
valid
Switch(config)#rmon statistics 2 interface gigabitEthernet 1/0/2 owner monitor status
valid
Switch(config)#show rmon statistics
Index Port Owner
----- ---- -----
1 Gi1/0/1 monitor
2 Gi1/0/2 monitor
Switch(config)#end
Enter the owner name of the entry with 1 to 16 characters. The default name
Enter the status of the entry. UnderCreation indicates that the entry is
State
-----
valid
valid
RMON Configurations
User Guide 1061