TP-Link T2600G Series User Manual page 1098

Figure 6-3 Creating an SNMP View
3) Choose MAINTENANCE > SNMP > SNMP v3 > SNMP Group and click
the following page. Create a group named nms-monitor, enable authentication and
privacy, and add View to Read View and Notify View. Click Create.
Figure 6-4 Configuring an SNMP Group
4) Choose MAINTENANCE > SNMP > SNMP v3 > SNMP User and click
following page. Create a user named admin for the NMS, set the user type as Remote
User and specify the group name. Set the Security Level in accordance with that of the
group nms-monitor. Choose SHA authentication algorithm and DES privacy algorithm,
and set corresponding passwords. Click Create.
Configuration Example
to load
to load the
User Guide 1069