TP-Link T2600G Series User Manual page 1057

Figure 2-3 Creating an SNMP View
View Name
View Type
MIB Object ID
2) Click Create.
2.1.3 Creating SNMP Communities (For SNMP v1/v2c)
Choose the menu MAINTENANCE > SNMP > SNMP v1/v2c and click
following page.
Figure 2-4 Creating an SNMP Community
Follow these steps to create an SNMP community:
1) Set the community name, access rights and the related view.
Community Name
Set the view name with 1 to 16 characters. A complete view consists of all MIB
objects that have the same view name.
Set the view to include or exclude the related MIB object.
Include: The NMS can view or manage the function indicated by the object.
Exclude: The NMS cannot view or manage the function indicated by the object.
Enter a MIB Object ID to specify a specific function of the device. When a MIB Object
ID is specified, all its child Object IDs are specified. For specific ID rules, refer to the
device related MIBs.
Configure the community name. This community name is used like a password
and the NMS can access the specified MIB objects of the switch using the same
community name.
SNMP Configurations
to load the
User Guide 1028