DDM RX Power
ACL Counter
2) Click Apply.
3.2 Using the CLI
3.2.1 Configuring the NMS Host
Configure parameters of the NMS host and packet handling mechanism.
Step 1
Monitors the RX Power of SFP modules inserted into the SFP ports on the
switch. The trap can be triggered when the RX Power of any SFP module has
reached the warning or alarm threshold.
Note:
T2600G-52TS does not support this trap.
Monitors matched ACL information, including the matched ACL ID, rule ID
and the number of the matched packets. With both this trap and the Logging
feature in the ACL rule settings enabled, the switch will check the matched
ACL information every five minutes and send SNMP traps if there is any
updated information.
configure
Enter Global Configuration Mode.
Notification Configurations
User Guide
1044