TP-Link T2600G Series User Manual page 1011

Configuring OAM
2.1.3 Configuring RFI
Choose the menu MAINTENANCE > Ethernet OAM > Remote Failure Indication to load
the following page.
Figure 2-3 Configure RFI
Follow these steps to configure Remote Failure Indication:
1) Select one or more ports and configure the Dying Gasp Notification and Critical Event
Notification features.
Dying Gasp
Notification
Critical Event
Notification
2) Click Apply.
With Dying Gasp Notification enabled, if the switch detects an unrecoverable fault
on the network, it will report this condition locally and send Information OAMPDU
to notify the peer.
With Critical Event Notification enabled, if the switch detects an unspecified
critical event occurs, it will report this condition locally and send Information
OAMPDU to notify the peer.
Ethernet OAM Configurations
User Guide 982