TP-Link T2600G Series User Manual page 1012

Configuring OAM
2.1.4 Configuring Remote Loopback
Choose the menu MAINTENANCE > Ethernet OAM > Remote Loopbak to load the
following page.
Figure 2-4 Configure Remote Loopback
Follow these steps to configure Remote Loopback:
1) Select one or more ports and configure the relevant options.
Received Remote
Loopback
Remote
Loopback
2) Click Apply.
Choose to ignore or to process the received remote loopback requests.
Start or stop the remote loopback process. The port to be configured should be
in active mode and has established OAM connection with the peer.
Start: Request the remote peer to start the OAM remote loopback mode.
Stop: Request the remote peer to stop the OAM remote loopback mode.
Ethernet OAM Configurations
User Guide 983