Using The Cli; Configuring Stp/Rstp Parameters On Ports - TP-Link T2600G Series User Manual

Configuring Spanning Tree
Designated Bridge
Root Port
Latest TC Time
TC Count

2.2 Using the CLI

2.2.1 Configuring STP/RSTP Parameters on Ports

Follow these steps to configure STP/RSTP parameters on ports:
Step 1 configure
Enter global configuration mode.
Step 2 interface {fastEthernet port | range fastEthernet port-list | gigabitEthernet port | range
gigabitEthernet port-list | ten-gigabitEthernet port | range ten-gigabitEthernet port-list |
port-channel port-channel-id | range port-channel port-channel-list }
Enter interface configuration mode.
Step 3 spanning-tree
Enable spanning tree function for desired ports.
Displays the bridge ID of the designated bridge. The designated bridge is the
switch that has designated ports.
Displays the root port of the current switch.
Displays the latest time when the topology is changed.
Displays how many times the topology has changed.
STP/RSTP Configurations
User Guide 397