TP-Link T2600G Series User Manual page 1016

Configuring OAM
Step 6
Step 7
The following example shows how to enable OAM and configure the OAM mode as passive
on port 1/0/1.
Switch#configure
Switch(config)#interface gigabitEthernet 1/0/1
Switch(config-if)#ethernet-oam
Switch(config-if)#ethernet-oam mode passive
Switch(config-if)#show ethernet-oam configuration interface gigabitEthernet 1/0/1
Gi1/0/1
-----------------------------------------------------------
OAM
Mode
...
Switch(config-if)#end
Switch#copy running-config startup-config
2.2.2 Configuring Link Monitoring
With Link Monitoring, the following link events can be reported: Error Symbol Period, Error
Frame, Error Frame Period, Error Frame Seconds.
■ Configuring Error Symbol Period Event
An Error Symbol Period event occurs if the number of symbol errors exceeds the defined
threshold within a specific period of time.
Follow these steps to configure the Error Symbol Period event:
Step 1
Step 2
end
Return to privileged EXEC mode.
copy running-config startup-config
Save the settings in the configuration file.
: Enabled
: Passive
configure
Enter global configuration mode.
interface {fastEthernet port | range fastEthernet port-list | gigabitEthernet port | range
gigabitEthernet port-list | ten-gigabitEthernet port | range ten-gigabitEthernet port-list }
Enter interface configuration mode.
Ethernet OAM Configurations
User Guide 987