Connecting To A 20-Pin 1.778Mm Pitch Sdip Foot Pattern - Renesas R0E521000CPE00 User Manual

R0E521000CPE00 User's Manual

2.9.3 Connecting to a 20-pin 1.778mm pitch SDIP Foot Pattern

Figure 2.22 shows a procedure of connecting to a 20-pin 1.778mm pitch SDIP foot pattern on the user system using the
R0E521174CDB00 (included with the R0E521174CPE10). For details on the R0E521174CDB00, refer to its user's manual.
(1) Mount the two pieces of PM-6-10P (10-conductor) included with the R0E521174CDB00 to the user system.
(2) Attach the R0E521174CDB00 to the J3 and J4 of the R0E521000CPE10.
(3) Attach the R0E521174CDB00 to the PM-6-10P.
R0E521174CDB00
Figure 2.22 Connecting to a 20-pin 1.778mm pitch SDIP foot pattern
Note on Connecting to the User System:
Take care not to attach a converter board in a wrong direction. It may cause a fatal damage to the emulator and
user system.
Notes on Connectors of the Converter Board:
The connectors of the R0E521000CPE00 and R0E521174CDB00 are guaranteed for only 50 insertion/removal
iterations.
The connectors of the R0E521174CDB00 and PM-6-10P are guaranteed for only 100 insertion/removal
iterations.
REJ10J0845-0600 Rev.6.00 Aug. 20, 2009
Page 40 of 92
R0E521000CPE00
(2)
(3)
PM-6-10P*
(1)
: No. 1 pin
*: These items are included with the R0E521174CDB00 package.
CAUTION
IMPORTANT
On-board evaluation
FLASH
version MCU
20-pin 1.778mm pitch SDIP
(PRDP0020BA-A) foot pattern
2. Setup