Connecting To An 80-Pin 0.5Mm Pitch Lqfp Foot Pattern - Renesas R0E521000CPE00 User Manual

R0E521000CPE00 User's Manual

2.9.8 Connecting to an 80-pin 0.5mm pitch LQFP Foot Pattern

Figure 2.27 shows a procedure of connecting to an 80-pin 0.5mm pitch LQFP foot pattern on the user system using the
R0E5212DACFK00 (included with the R0E5212DACPE00). For details on the R0E5212DACFK00, refer to its user's manual.
(1) Mount the NQPACK080SD-ND included with the R0E5212DACFK00 to the user system.
(2) Attach the YQPACK080SD included with the R0E5212BACFK00 to the NQPACK080SD-ND and secure it with the
YQ-GUIDE's.
(3) Attach the R0E5212DACFK00 to the J3 and J4 of the R0E521000CPE00.
(4) Attach the R0E5212DACFK00 to the YQPACK080SD.
R0E5212DACＦK00
Figure 2.27 Connecting to an 80-pin 0.5mm pitch LQFP foot pattern
Note on Connecting to the User System:
Take care not to attach a converter board in a wrong direction. It may cause a fatal damage to the emulator and
user system.
Notes on Connectors of the Converter Board:
The connectors of the R0E521000CPE00 and R0E5212DACFK00 are guaranteed for only 50 insertion/removal
iterations.
The connectors of the R0E5212DACFK00 and YQPACK080SD are guaranteed for only 100 insertion/removal
iterations.
REJ10J0845-0600 Rev.6.00 Aug. 20, 2009
Page 45 of 92
R0E521000CPE00
(3)
(4)
YQ-GUIDE(×4) *
YQPACK080SD *
②
NQPACK080SD-ND *
①
● No. 1 pin
*: These items are included with the R0E5212DACFK00
CAUTION
IMPORTANT
On-board evaluation
HQPACK080SD
(not included)
FLASH version
MCU
80-pin 0.5mm pitch LQFP
(PLQP0080KB-A) foot pattern
2. Setup