Operating Environment - Renesas R0E521000CPE00 User Manual

R0E521000CPE00 User's Manual
Table 1.6 R0E521000CPE00 specifications (2)
Power supply for emulator
Host machine interface
*3: If using this product when the voltage is less than 2.7V, the JP1 of the R0E521000EPBM0 should be set to EXT.

1.4 Operating Environment

Be sure to use this emulator with the operating environmental of the emulator and host machine listed in Tables 1.7 and 1.8.
Table 1.7 Operating environmental conditions
Item
Operating temperature
Storage temperature
Table 1.8 Operating environment of the host machine
Item
Host machine
OS
CPU
Interface
Memory
Hard disk
Display resolution
Pointing device such as mouse
CD drive
*1 Windows is either a registered trademark or trademark of Microsoft Corporation in the United States and other countries.
*2 Can be connected to the USB2.0 port of the host machine.
With the USB interface of this product, not all hardware (such as host machine, USB devices, USB hub) combination will
work and guaranteed.
REJ10J0845-0600 Rev.6.00 Aug. 20, 2009
Page 19 of 92
DC5.0V±5%/(2A) externally supplied (Prepare a power supply which complies
with CE marking requirements separately.)
*3
USB (USB 1.1 full-speed, mini-B standard connector)
5 to 35°C (no dew)
-10 to 60°C (no dew)
IBM PC/AT compatibles
Windows® XP, Windows® 2000 *
Pentium III 600 MHz or more recommended
2
USB 1.1 full-speed*
128 MB or greater (more than 10 times the file size of the load
module) recommended
Emulator debugger installation needs 100 MB or more free
space. (In view of swap area, keep another free space which is
more than twice the memory capacity. (More than four times the
memory capacity recommended.))
1024 × 768 or greater recommended
Mouse or any other pointing device usable with the above OS
that can be connected to the main body of the host machine.
Needed to install the emulator debugger or refer to the user's
manual
Description
Description
1
1. Outline