Renesas R0E521000CPE00 User Manual page 52

R0E521000CPE00 User's Manual
(3) Emulator tab
1) Specifying the target clock
(4) Script tab
1) Automatically executing a script command
When the tab settings (1) to (4) above are completed, click OK button.
REJ10J0845-0600 Rev.6.00 Aug. 20, 2009
Page 50 of 92
3. Usage (How to Use the Emulator Debugger)
Specifying the target clock
Specify the clock sources supplied to the MCU (main clock and
sub clock). Select the appropriate clock sources according to the
clock used by your target MCU.
- Internal
Emulator's internal clock
- External
User system clock
The option you have specified here remains effective the next time
you start up.
Automatically executing a script command
To automatically execute a script command when starting up the
debugger, click the "Refer..." button and specify the script file to
be executed.
Clicking the "Refer..." button brings up a file selection dialog box.
The script file you have selected is displayed in the Init File:
section of the dialog box shown here. If you do not want to
automatically execute a script command, delete the character
string displayed in the Init File: section of the dialog box.
What you specify here is reflected at only startup. If you specify
back again in the Init dialog box after startup, whatever you
specified has no effect (restart the emulator debugger).