Renesas R0E521000CPE00 User Manual page 70

R0E521000CPE00 User's Manual
(2) Modifying the RAM monitor display area
1) RAM Monitor window
2) RAM Monitor Area Setting window
RAM Monitor Area Setting
Current Assigned Area
are available.
3) RAM monitor area setting dialog box
Set RRAM Area
Start:
Size:
Area:
REJ10J0845-0600 Rev.6.00 Aug. 20, 2009
Page 68 of 92
Add...
Remove
Remove All
View
Save... Load... Close
blocks
Cancel
3. Usage (How to Use the Emulator Debugger)
Modifying the RAM monitor display area
Clicking this button opens the RAM monitor setting window.
: Shows the RAM monitor area setting window.
To change the displayed area, click the following buttons.
:
Shows the blocks at the preceding addresses.
: Shows the blocks at the following addresses.
RAM Monitor Area Setting Window
By default, the monitor area is set to 000400h through 0007FFh.
It is possible to add, delete and change the RAM monitor area.
You can change the start address, size (number of blocks) of the
RAM monitor area by selecting the desired RAM monitor area
from the list.
To add a RAM monitor area, click the "Add..." button. The RAM
Monitor Area Setting Window will be displayed.
Specifying the start address
You can set the start address of the RAM area to be monitored.
Specifying the size
You can set the size to be monitored by specifying the number of
blocks from the start address. One block is 256 bytes in size.