Renesas R0E521000CPE00 User Manual page 63

R0E521000CPE00 User's Manual
(4) Setting the combinatorial condition for the hardware break point
1) Window for setting the combinatorial condition
1 A1 000000 FETCH (addr) == 000000
REJ10J0845-0600 Rev.6.00 Aug. 20, 2009
Page 61 of 92
3. Usage (How to Use the Emulator Debugger)
Setting the combinatorial condition
There are following three conditions that you can choose for the
combinatorial events.
- AND
The program breaks when all of the specified events occur.
- AND (Same Time)
The program breaks when the specified events occur at the
same time.
- OR
The program breaks when one of the specified events occurs.
For each event, a pass count (number of passing) is specifiable (1--
255). When "AND" (same time) is specified for Combination, you
can not specify the pass count (fixed to one).
When you have finished setting the combinatorial event condition,
click the "Set" button.