Connecting To A 64-Pin 0.8Mm Pitch Lqfp Foot Pattern - Renesas R0E521000CPE00 User Manual

R0E521000CPE00 User's Manual

2.9.6 Connecting to a 64-pin 0.8mm pitch LQFP Foot Pattern

Figure 2.25 shows a procedure of connecting to a 64-pin 0.8mm pitch LQFP foot pattern on the user system using the
R0E5212BACFG00 (included with the R0E5212BACPE00). For details on the R0E5212BACFG00, refer to its user's manual.
(1) Mount the NQPACK064SA160 included with the R0E5212BACFG00 to the user system.
(2) Attach the YQPACK064SA included with the R0E5212BACFG00 to the NQPACK064SA160 and secure it with the YQ-
GUIDE's.
(3) Attach the R0E5212BACFG00 to the J3 and J4 of the R0E521000CPE00.
(4) Attach the R0E5212BACFG00 to the YQPACK064SA.
R0E5212BACＦG00
Figure 2.25 Connecting to a 64-pin 0.8mm pitch LQFP foot pattern
Note on Connecting to the User System:
Take care not to attach a converter board in a wrong direction. It may cause a fatal damage to the emulator and
user system.
Notes on Connectors of the Converter Board:
The connectors of the R0E521000CPE00 and R0E5212BACFG00 are guaranteed for only 50 insertion/removal
iterations.
The connectors of the R0E5212BACFG00 and YQPACK064SA are guaranteed for only 100 insertion/removal
iterations.
REJ10J0845-0600 Rev.6.00 Aug. 20, 2009
Page 43 of 92
R0E521000CPE00
(3)
(4)
YQ-GUIDE(×4) *
YQPACK064SA *
(2)
NQPACK064SA160 *
(1)
● No. 1 pin
*: These items are included with the R0E5212BACFG00
CAUTION
IMPORTANT
On-board evaluation
HQPACK064SA160
(not included)
FLASH version
MCU
64-pin 0.8mm pitch LQFP
(PLQP0064GA-A) foot pattern
2. Setup