Ricon LASER AP1600 Operating Instructions Manual page 98

2
Paper Input /
2
Menu
Paper Size
Thick Paper
Description
You should set the paper size for the bypass tray, optional
envelope feeder, and for those not indicated on the paper
size dials of the Tray 1, Tray 2 and Tray 3.
When you select the sizes that are not indicated on the pa-
per size dial of Tray 1, Tray 2 or Tray 3, you should set the
dial to "p" and then select the paper size here.
Tray 1 of Type 1 Printer does not support "p" settings.
The dial settings override settings made here.
Bypass Tray
For more information about paper sizes that can be set
in the bypass tray, see P.17 "Paper and Other Media Sup-
ported by this Printer".
Tray1
For more information about paper sizes that can be set
in Tray 1, see P.17 "Paper and Other Media Supported by
this Printer".
Tray 2 (option)
For more information about paper sizes that can be set
in Tray 2, see P.17 "Paper and Other Media Supported by
this Printer".
Note
When the optional envelope feeder is not installed,
you should not set the size for envelopes.
Tray 3 (option, Type 1 Printer only)
For more information about paper sizes that can be set
in Tray 3, see P.17 "Paper and Other Media Supported by
this Printer".
You can enhance image quality for printing on thick paper.
When the toner is not fused enough, set this function to
"On". If the image is blurred, set it to "----" .
• Off
• On
• ----
Note
Default: Off
You do not have to set this function to "On" or "----" eve-
ry time you use thick paper. Try printing with this func-
tion off, and if you want to enhance image quality,
adjust it using this function.
Job Control Menu
5
87