Table of Contents
Advertisement
Messages
Load Bypass Tray
{paper size}
Description
There is no paper on the by-
pass tray.
The actual size of paper
loaded in the bypass tray
does not match the size con-
figured for the printer.
Error & Status Messages on the Operation Panel
Comments
Load {paper size} paper in the se-
lected feed direction onto the by-
pass tray. Printing will not
automatically resume if the pa-
per size and direction setting is
incorrect. There are two methods
to resume printing.
A
Use the operation panel to set
the correct size and direction
of the paper in the bypass
tray. ⇒ P.87 "Paper Input
Press {Enter q} to start print-
B
ing, regardless of the size and
direction of the paper in the
bypass tray.
Note
When "Auto Select" is select-
ed for the paper source using
the printer driver, this mes-
sage might appear when there
is {paper size} paper in a dif-
ferent feed direction in any of
the trays.
The page is printed in the in-
correct format on the paper
loaded on the bypass tray in
the following cases.
• If you press {Enter q} be-
fore loading the correct pa-
per.
• If the selected period of
time has passed with "Au-
to Continue" on. In these
cases, you cannot continue
printing due to the paper
size error. You should take
one of the following ac-
tions to clear this error:
• Press {Enterq}. ( "Auto
Continue" does not
work with this error.)
• Open and close any of
the trays.
2
/
"
2
4
53
Advertisement
Table of Contents
