Table of Contents
Advertisement
Troubleshooting
Messages
Load Tray XX
{paper size}
4
54
Description
Tray XX is empty.
The actual size of paper
loaded in the XX tray does
not match the size config-
ured for the printer.
Comments
Load {paper size} paper in the se-
lected feed direction into tray
XX. Printing will not automati-
cally resume if the paper size and
direction setting is incorrect.
There are two methods to
resume printing.
A
Use the operation panel to set
the correct size and direction
of the paper in tray XX. ⇒
2
P.87 "Paper Input
Press {Enter q} to start print-
B
ing, regardless of the size and
direction of the paper in tray
XX. If there is no paper in the
indicated tray, printing will
not start.
Note
When "Auto Select" is select-
ed for the paper source using
the printer driver, this mes-
sage might appear when there
is {paper size} paper in a dif-
ferent direction in any of the
trays.
The page is printed in the in-
correct format on the paper
loaded in tray XX in the fol-
lowing cases.
• If you press {Enter q}
without loading the cor-
rect paper.
• If the selected period of
time has passed with "Au-
to Continue" on. In these
cases, you cannot continue
printing due to the paper
size error. You should take
one of the following ac-
tions to clear this error:
• Press {Enter q}. ("Auto
Continue" does not
work with this error.)
• Open and close any of
the trays.
/
"
2
Advertisement
Table of Contents
