Table of Contents
Advertisement
Troubleshooting
Important
Do not use chemical cleaner or
organic solvent such as thinner
or benzene.
G
While sliding the green lock lever
to the right (A A A A ), set the paper feed
roller to its original position (B B B B ).
After that, return the green lock
lever to its original position (C C C C ).
4
Note
Confirm that the green lock le-
ver secures the roller correctly
by confirming that the roller ro-
tates smoothly.
H
Move the printer to the place
where it was placed. Set the paper
tray into the printer while lifting
the front of the tray, then push it
in until it stops.
I
Insert the plug of the power cord
into the wall socket securely.
Connect all the cables that were
removed in step B B B B .
76
Note
Follow the same procedure to
clean the paper feed roller of the
optional tray unit.
J
Turn the printer's power switch
on.
Type 2 printer
R CAUTION:
• The paper tray does not have a
stopper. When pulling it out, be
careful not to pull it strongly. If
you do, the tray might fall and
cause personal injury.
Note
See the inside front cover of this
manual to confirm which printer
(Type 1 Printer or Type 2 Printer)
you have.
A
Turn the printer's power switch
off.
B
Pull out the plug from the socket.
Remove all the cables from the
printer.
C
Slide the paper tray out of the
printer.
Advertisement
Table of Contents
