Ricon LASER AP1600 Operating Instructions Manual page 32

Paper weight and number of sheets to be set
Standard Tray
Paper Feed Unit (DLT) Type 2000
(option)
Paper Feed Unit (A3) Type 2000
(option)
Paper Feed Unit (LT) Type 2000
(option)
Paper Feed Unit (A4) Type 2000
(option)
Bypass Tray
Envelope Feeder Type 2000
*1
Confirm that the top of the stack is not higher than the limit mark indicated on the
side fence of the tray.
*2
The envelope feeder requires the installation of the optional paper feed unit.
Type 2 Printer
Note
See the inside front cover of this manual to confirm which printer (Type 1
Printer or Type 2 Printer) you have.
Important
Be sure to set the paper size dial to match the actual paper size loaded in the
tray.
For Tray 1 and 2, the dial setting overrides the setting made with the opera-
tion panel.
The envelope feeder requires the installation of the optional paper unit.
The envelope feeder can be exchanged only with Tray 2.
Note
The supported paper size varies depending on the memory size of the printer.
⇒ P.114 "Memory Capacity and Paper Size"
For more information about the meanings of the abbreviations, see the notes
at the bottom of each table.
Paper and Other Media Supported by this Printer
Supported paper
weight
2
60 - 90 g/m (16 - 24 lb)
2
60 - 90 g/m (16 - 24 lb)
2
60 - 90 g/m (16 - 24 lb)
2
60 - 162 g/m (16 - 42 lb) 100 (80 g/m
⇒ P.25 "Types of Paper and Other Media"
*2
Maximum number of
*1
sheets (plain paper)
2
250 (80 g/m , 20 lb)
2
500 (80 g/m , 20 lb)
2
500 (80 g/m , 20 lb)
2
, 20 lb)
For other kind of papers,
see P.25 "Types of Paper
and Other Media".
3
21