Table of Contents
Advertisement
Messages
Change
Maintenance Kit
Low On Toner
Memory Overflow
Please Wait
Description
It is time to replace parts in-
cluded in the Maintenance
Kit.
The toner cartridge is not set
correctly or toner is almost
running out.
There is not enough memory
to print the data.
The printer is preparing for
printing.
Error & Status Messages on the Operation Panel
Comments
Replace parts. ⇒ P.101 "Replacing
Parts"
Set the toner cartridge correctly.
About 1,000 pages can be esti-
mated to be printed after "Low
on Toner" appears on the panel
display (A4 5% test chart). If the
image density gets too light, pre-
pare a new toner cartridge and
replace it with a new one.
⇒ P.70 "Replacing the Toner Car-
tridge"
Press {Enter q} to print the data.
To clear this message, change the
print resolution from 1200 dpi to
600 dpi or 600 dpi to 300 dpi, and
try printing again. If the print re-
sult is not enhanced, you should
increase the memory capacity.
Wait for a while.
4
55
Advertisement
Table of Contents
