Ricon LASER AP1600 Operating Instructions Manual page 29

Paper and Other Media
Important
Be sure to set the paper size dial to match the actual paper size loaded in the
tray. When the actual paper size is not shown on the dial, set the dial to "p"
and select the paper size using the operation panel.
For Tray 1, 2 and 3, the dial setting overrides the setting made with the oper-
ation panel.
The envelope feeder requires the installation of the optional paper unit. When
one optional paper unit is installed, the envelope feeder can be exchanged
with Tray 2. When two optional paper units are installed, it can be exchanged
with Tray 2, not with Tray 3.
3
Note
The supported paper size varies depending on the memory size of the printer.
⇒ P.114 "Memory Capacity and Paper Size"
For more information about the meanings of the abbreviations, see the notes
at the bottom of each table.
18