Table of Contents
Advertisement
Troubleshooting
Messages
Error
SC_2700
4
Error
SC_2900
Error
SC_3100
58
Description
An error has occurred in op-
tional Network Interface
Board.
An error has occurred in the
RS232C board.
An error has occurred in the
optional memory unit
(Printer Feature Expander
Type 185).
Comments
Remove Network Interface
Board from the printer and turn
the printer's main switch off and
then on. Then, try to perform the
print job.
Note
If you remove Network Inter-
face Board, you cannot per-
form the print job over the
network. You can send the
print job to the printer only
via a parallel cable connec-
tion.
Turn the printer's power switch
off and then on.
Turn off the printer's power
switch. Reinstall the RS232C
board and turn on the printer's
power switch.
Turn off the printer's power
switch. Remove the RS232C
board and turn on the printer's
power switch.
Note
If you remove the RS232C
board, you cannot perform
the print job via a serial cable
connection. You can send the
print job to the printer only
via a parallel cable connec-
tion.
Remove the memory unit from
the printer and turn the printer's
switch off and then on. Then, try
to perform the print job.
Note
If you remove the memory
unit, you might not be able to
perform the print job contain-
ing the large complex data.
Advertisement
Table of Contents
