Table of Contents
Advertisement
Type 2 printer: loading envelopes into
the envelope feeder
Note
See the inside front cover of this
manual to confirm which printer
(Type 1 Printer or Type 2 Printer)
you have.
Important
With the optional envelope feeder,
you can load up to 60 envelopes at
a time. For more information about
envelopes, see P.25 "Types of Paper
and Other Media".
A
Slide the optional paper tray out
until it stops. After that, lift it
slightly, then slide it out.
Note
Keep the paper tray with paper
in a cool and dry place.
B
Prepare the envelope feeder.
Type 2 Printer: Loading Paper and Other Media
C
Slide the left side guide to the left
by pinching it. Slide the rear
guide backwards by pinching it.
D
Load envelopes into the envelope
feeder, with the print side up and
the sides of the flaps on the right
as shown in the illustration.
Important
Confirm that the envelope flaps
are securely folded down, and
that there is no air inside the en-
velopes.
Note
Be sure to align the right edge to
the side fence.
Confirm that the top of the stack
is not higher than the limit mark
on the side fence.
Confirm that the envelopes fit
under the side guides.
Do not press down the stack of
envelopes with too much force.
3
47
Advertisement
Table of Contents
