Ricon LASER AP1600 Operating Instructions Manual page 146

Installing the PostScript Printer Driver
This section describes basic instructions for installing the printer driver. The ac-
tual procedure may differ depending on the operating system. Follow the ap-
propriate procedures below.
Important
Be sure to install the PPD file for Windows 2000. Do not accidently install the
PPD file for Windows 95/98 and Windows NT4.0.
Installing the printer driver
A
Close all applications that are currently running.
B
Click [Start] on the taskbar, point to [Settings], and then click [Printers].
The [Printers] window appears.
C
Double-click the [Add Printer] icon.
[Add Printer Wizard] starts.
D
Check [Local Printer] and click [Next].
A dialog box for selecting the printer port appears.
E
Click to select the printer port you want to use, and then click [Next].
A dialog box for selecting the printer manufacture and model name appears.
F
Click [Have Disk].
A dialog box for installing the driver from a disk appears.
G
Insert the CD-ROM into the CD-ROM drive while pressing the { { { { SHIFT} } } } key
until the computer finishes accessing the CD-ROM.
If the Auto Run program starts, click [Cancel].
H
Change the drive name in the list box to the name of the CD-ROM
drive,and then click [Browse].
I
In the box, double-click [PS] and [WIN2000]. Then double-click the folder of
the appropriate language for the operating system. Finally, click [Open].
J
Click [OK].
A printer model selection dialog box appears.
K
Click to select the name of the printer whose driver you want to install, and
then click [Next].
A dialog box for changing the printer name appears.
7