Table of Contents
Advertisement
The following message appears
on the panel display.
Job Control:
1.Paper Input
C Press { { { { Enter q
q
q
q } } } } .
The following message appears
on the panel display.
Paper Input:
1.Tray Priorityl
D Press { { { { T T T T } } } } or { { { { U U U U } } } } until the fol-
lowing message appears on the
panel display.
The following message appears
on the panel display.
Paper Input:
3.Paper Size
E Press { { { { Enter q
q } } } } .
q
q
The following message appears
on the panel display.
Paper Size:
1.Bypass Tray
F Press { { { { Enter q
q } } } } .
q
q
G Press { { { { T T T T } } } } or { { { { U U U U } } } } to select the
paper size you have set in the
bypass tray.
H Press { { { { Enter q
q } } } } to apply the
q
q
setting. Wait for a while.
I After the panel display chang-
es, press { { { { On Line} } } } .
Type 2 Printer: Loading Paper and Other Media
The "Ready" message appears
on the panel display.
j
Ready
l
E
Start printing with the computer.
Type 2 Printer: Loading Paper
j
in the Optional Paper Tray
Note
See the inside front cover of this
manual to confirm which printer
(Type 1 Printer or Type 2 Printer)
you have.
Important
j
If the printer is equipped with the
l
optional tray, do not pull out more
than one tray with paper at a time.
If you do, the printer might tilt for-
ward.
Confirm that the setting of the pa-
per size dial matches the paper size
j
and feed direction in the tray, oth-
l
erwise the printer might be dam-
aged, or printing problems might
occur.
Reference
For more information about the
size and feed direction of paper
that can be loaded in the tray, see
P.17 "Paper and Other Media Sup-
ported by this Printer".
3
43
Advertisement
Table of Contents
