Appendix
B
When looking inside where the
paper tray was installed, you can
see the paper feed roller. While
pinching the stopper inside the
roller with fingers (A A A A ), slide it to
the left, so that the paper feed
roller can be released (B B B B ).
2
1
C
Set the new paper feed roller.
With the round part of the roller
facing up (A A A A ), insert the roller
6
into the shaft until the roller
clicks into position (B B B B ).
1
D
Leave the paper tray pulled out
and go to P.110 "Replacing the
transfer roller".
110
2
Replacing the transfer roller
A
Open the front cover by pulling
the front cover release buttons.
B
Open the transfer roller cover.
C
Wear the gloves included in the
maintenance kit to avoid making
your hands dirty with toner on
the transfer roller.
D
Hold the green parts of the roller
on both sides, and remove the
roller from the printer as shown
in the illustration.
TS4M160E
TS4M170J
TS4M180J